Munro76 Posted March 25, 2018 Report Share Posted March 25, 2018 I have carved a timber master for a paddletail softplastic. I am after suggestions for sealing the timber to make it smooth before i make a silicone mold. Any suggestion appreciated. Thankyou. Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted March 26, 2018 Report Share Posted March 26, 2018 Epoxy like Devcon 2 Ton, Etex, AlumiUV, even thin superglue then sanded (a little less "smooth" unless you use very fine sandpaper). I don't know which silicone you are going to use, and the platinum cure ones are more sensitive, but these will work. I normally use AlumiUV. 1 Quote Link to comment Share on other sites More sharing options...
ravenlures Posted March 26, 2018 Report Share Posted March 26, 2018 First time for me I had a lure made with 3D printing and I am making a mold right now. Lure needs no sealing since it is plastic and is as smooth as a baby's a.. Now back to work. wayne 3 1 Quote Link to comment Share on other sites More sharing options...