muz Posted July 4, 2018 Report Share Posted July 4, 2018 Hi folks, I just want to ask, why my bait shrink after it cures, im using alumisol and POP mold, can anybody help me out. and i inject my baits not pour. and sorry my english is not that good cause im asian Quote Link to comment Share on other sites More sharing options...
AZ Fisher Posted July 4, 2018 Report Share Posted July 4, 2018 http://www.tackleunderground.com/community/search/?&q=dents&search_and_or=or&search_in=titles Welcome to TU. You'll find some info on the subject here ^^^. I went to "Activity", top left corner of screen, drop down to" Search", type in "Dents" and then search and there are 16 results. Dents are a common problem. I think you'll find an answer here^^^^ 1 Quote Link to comment Share on other sites More sharing options...
mark poulson Posted July 4, 2018 Report Share Posted July 4, 2018 Most of my shrinkage is due to hot plastic (thank you Frank). Try injecting at lower temps, around 310-315 F, and see if that helps. A thicker bait will shrink more, so also be sure that you keep your mold spru topped off with hot plastic, so it can be drawn down into the mold as the plastic inside cools and wants to shrink. 1 Quote Link to comment Share on other sites More sharing options...
muz Posted July 4, 2018 Author Report Share Posted July 4, 2018 thanks mark poulson for helping and thanks AZ fisher for welcoming me , im still new in making soft plastic. so far, all about soft plastic i learn from here, such a pleasure to be here. Quote Link to comment Share on other sites More sharing options...
