Jump to content
rockslide

micro balloons

Recommended Posts

Never tried in softner . The only problem I could for see is the balloons are going to want to float on top of softnerlike they do when you heat them up in plastic. To be honest with you when I use them I’ll put them right under my vent hood and wear a respirator just in case if you’re very careful with them  you should be ok. I have never had a problem but I have a large vent capable of moving a lot of air.it will pull the air out of my bait shop in a couple of minutes. So I don’t worry so much about it getting air born. 

 

Ps anything you can do to limit your exposure to it is a good thing.

Edited by wallyc14
  • Like 2
Link to comment
Share on other sites

On 7/19/2018 at 11:26 AM, wallyc14 said:

Never tried in softner . The only problem I could for see is the balloons are going to want to float on top of softnerlike they do when you heat them up in plastic. To be honest with you when I use them I’ll put them right under my vent hood and wear a respirator just in case if you’re very careful with them  you should be ok. I have never had a problem but I have a large vent capable of moving a lot of air.it will pull the air out of my bait shop in a couple of minutes. So I don’t worry so much about it getting air born. 

 

Ps anything you can do to limit your exposure to it is a good thing.

thanks for the help!

Link to comment
Share on other sites

Safest way I know is to use them is to 

1- wear a   Respirator When mixing in to plastic

2- make sure there is no cross breeze or anything like that it takes nothing to get them airborne 

3- use them under a vent hood 

Number one being the biggest

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top