Coley Posted October 19, 2004 Report Share Posted October 19, 2004 This is my latest creation and idea. It is a double decker dryer made from Tinker Toys. I used a 3/8" oak dowel for the shaft. On each end of the oak dowel is a ball bearing. The upper shaft is driven by a spring v-belt from the lower shaft. I hold my baits with a hemostat and place them between two clips. It has a cardboard housing and because my shop is rather cool in the winter time, I added a single eye hot plate ( I used to melt plastic on). The heat allows the epoxy to flow out nicely. Coley Quote Link to comment Share on other sites More sharing options...
Tally Posted October 19, 2004 Report Share Posted October 19, 2004 Excellent Coley. I also use a heat source on my dryer for when it gets a little cold. It don't feel to bad when I get a little of the leftover heat. Tally Quote Link to comment Share on other sites More sharing options...
MaddoxBay Posted October 20, 2004 Report Share Posted October 20, 2004 thats nice coley... I have to get a dryer made Quote Link to comment Share on other sites More sharing options...
Lure--Prof Posted October 29, 2004 Report Share Posted October 29, 2004 Coley, Are you stealing the Grandkids' Tinker Toys again? Or is this just a design you've been working since you were a mere tot? If that is the case I really admire your resolve. (Enter Larry the Cable Guy) Seriously, nice job! And my own dryer owes more than a little to your Tinker Toy Design. Dean Quote Link to comment Share on other sites More sharing options...
