angler1724 Posted November 26, 2018 Report Share Posted November 26, 2018 I bought a few Brush Jig Mold heads off of Ebay and really like the head. I am having a hard time keeping the jig eye open when I cure the powder paint in my toaster oven. I am not using a fluid bed. I make sure the jig eye is as cleared as it can be before curing the heads. Does anyone have a suggestion what I might do to keep the eye open during the curing process? Thanks Gregg Quote Link to comment Share on other sites More sharing options...
21xdc Posted November 26, 2018 Report Share Posted November 26, 2018 Hang the jig from the eyelet when you bake. 1 Quote Link to comment Share on other sites More sharing options...
angler1724 Posted November 26, 2018 Author Report Share Posted November 26, 2018 Thanks for suggestion. I think that should really help Quote Link to comment Share on other sites More sharing options...
Will Wetline Posted November 27, 2018 Report Share Posted November 27, 2018 I believe cadman gets the credit for the idea of using Christmas ornament hangers. 1 Quote Link to comment Share on other sites More sharing options...
21xdc Posted November 27, 2018 Report Share Posted November 27, 2018 47 minutes ago, Will Wetline said: I believe cadman gets the credit for the idea of using Christmas ornament hangers. I have been doing that for years as well... Quote Link to comment Share on other sites More sharing options...
Jig Man Posted November 27, 2018 Report Share Posted November 27, 2018 I don't get any paint in the eye to start with. I hold the bait with needle nosed pliers covering the jig eye. I also only heat the head enough for the paint to cover the head with a dull very light coat so there are no drips. 1 Quote Link to comment Share on other sites More sharing options...
