Jump to content
ravenlures

ARGON GAS

Recommended Posts

Bloxygen uses ultra pure Argon, a powerful and natural inert gas to drive the oxygen and moisture out of your container. Simply blow the oxygen out of your container with Bloxygen and then seal the lid. The heavy, inert Bloxygen gas sinks down to block oxygen from the liquid surface.

That's from their website.

  • Like 1
Link to comment
Share on other sites

Bloxygen is 100% argon. Argon is used a lot in the welding industry. You can get it at pretty much any welding supply. One drawback is that you will either have to purchase the cylinder in comes in and then pay to have it refilled when necessary or pay rent on the cylinder while it is in your possession. And of course you still pay for it to be refilled even when renting.

One thing to remember is that since argon is heavier than air you don't need to be breathing it. If it gets into your lungs it can be really hard to expel. 

Hope this helps.

Ben

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top