Jump to content
basscatlildave

Hard Packing

Recommended Posts

8 hours ago, mark poulson said:

Bear in mind I am just a hobby pourer,  so this might not work for you.

I bought a small paint mixer for my colors.  It works.

You can Google small paint mixer and see a lot of options.

Me also but I wanted to make sure something would not happen if stainless nuts just stayed in the plastisol. Thanks guys. 

Link to comment
Share on other sites

What I do with my plastisol is take a wire coat hanger, I open it all the way up and cut off the ends where it has been wound.  I make a bend about 6 inches long and bring it back to the main wire.  Then I take the main wire and make a 90° bend.  That creates an L shaped wire with a double wire on the bottom.  I put it in a drill and place it in the bottle and turn on the drill.  It can be used to scrape the bottom and sides and does a heck of a mixing job.

I keep it right beside the plastisol jugs so it will always be handy.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top