Sign in to follow this  
basscatlildave

Hard Packing

8 posts in this topic

You could but there nothing like making sure all of it is off the bottom and mixed in. Get something that you can scrape the bottom well. You really want to make sure it is all mixed up. 

Share this post


Link to post
Share on other sites

Bear in mind I am just a hobby pourer,  so this might not work for you.

I bought a small paint mixer for my colors.  It works.

You can Google small paint mixer and see a lot of options.

Edited by mark poulson

Share this post


Link to post
Share on other sites
8 hours ago, mark poulson said:

Bear in mind I am just a hobby pourer,  so this might not work for you.

I bought a small paint mixer for my colors.  It works.

You can Google small paint mixer and see a lot of options.

Me also but I wanted to make sure something would not happen if stainless nuts just stayed in the plastisol. Thanks guys. 

Share this post


Link to post
Share on other sites

What I do with my plastisol is take a wire coat hanger, I open it all the way up and cut off the ends where it has been wound.  I make a bend about 6 inches long and bring it back to the main wire.  Then I take the main wire and make a 90° bend.  That creates an L shaped wire with a double wire on the bottom.  I put it in a drill and place it in the bottle and turn on the drill.  It can be used to scrape the bottom and sides and does a heck of a mixing job.

I keep it right beside the plastisol jugs so it will always be handy.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this