JayBee Posted February 12, 2019 Report Share Posted February 12, 2019 4 minutes ago, bladesandbaits said: I have never turned it JayBee. Sorry man maybe someone else can answer who has tried it. Gotcha, thanks Blades. 1 Quote Link to comment Share on other sites More sharing options...
BBK Posted February 12, 2019 Report Share Posted February 12, 2019 Hmm, that doesn't sound right. Maybe your KBS was too thick and is puddling because it is taking so long to cure the thick coating? I've done a few suspending baits and quite a few rogues, never noticed any difference.. actually I noticed a huge difference with epoxy adding so much weight, but KBS acted just like factory. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 12, 2019 Report Share Posted February 12, 2019 For weight sensitive lures, like suspending jerk baits, I use Rustoleum X2 Gloss Clear Acrylic in the rattle can. Two coats, 20 minutes apart, cured for 24 hours, and they're good to go. The finish doesn't like prolonged contact with soft plastics, so I keep those baits on the other side of my boat deck. Quote Link to comment Share on other sites More sharing options...
