Jump to content
ParkerFly

Indiana blades

Recommended Posts

If you have a Picasso spinnerbait, measure the blade and start calling blade companies. Tell them the size you have and see if that matches their size blades. If not go on to the next company. Can find a lot of this by looking on the i-net. Eventually someone will have a blade close to what you want.

Link to comment
Share on other sites

17 minutes ago, cadman said:

If you have a Picasso spinnerbait, measure the blade and start calling blade companies. Tell them the size you have and see if that matches their size blades. If not go on to the next company. Can find a lot of this by looking on the i-net. Eventually someone will have a blade close to what you want.

You're right. Just wanting to make a small quantity, and was hoping someone would have a Picasso lying around and could give me a ballpark. I don't happen to have one on hand and that model isn't sold locally.

Link to comment
Share on other sites

Be careful when using size charts.  Not all companies use the same size charts.  The blade manufacturers do not have a standard when it comes to sizing.  A size 6 from one manufacturer may not be the same length as a size 6 from a different manufacturer or company.

  • Like 1
Link to comment
Share on other sites

1 hour ago, JBarlow said:

Be careful when using size charts.  Not all companies use the same size charts.  The blade manufacturers do not have a standard when it comes to sizing.  A size 6 from one manufacturer may not be the same length as a size 6 from a different manufacturer or company.

 

Found that out the hard way myself.

 

Allen

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top