Jump to content
wootonc

best place to buy color for plastic

Recommended Posts

Hello I am new to pouring of soft plastics. I have been making jigs buzz baits spinner baits shakey heads for about 6 years now. I am looking at getting into the injection of plastics mainly swim baits grubs and finesse worms. Looking for do's and don'ts before I wast a lot of money like I did when I started making jigs before I found this site. Best places to buy molds plastics and coloring's. Thanks for the help

Link to comment
Share on other sites

I mainly have coloring and glitter from M-F manufacturing, they work well for me. I also have some from Jann's Netcraft.  Many people get their coloring and glitter from either lurecraft or Spike-it/Lureworks. Lots of places that make good colors but keep in mind that there are differences between the companies, even when its the "same" colorant. 

Lots of places to buy plastics too. I have used Do-It, Bait Plastics, and Dead On Plastix. All three have their pros and cons, but Do-It was probably my least favorite. 

  • Like 1
Link to comment
Share on other sites

I use mostly LureWorks with a few Doit x2 as well. Both are good imo. I haven’t tried any Lurecraft yet but hear they are good as well. I have a couple mf colors as well, have to use a ton of it to get a darker color, but it was good otherwise.

Link to comment
Share on other sites

For inks I buy from Lure craft, Spike it ( Lure works)and Dead on plastic

for Glitter Lure craft and Spike it ( Lure works) 

plastic i am currently using Bait plastic ( Polysol) 

molds. Hand pour, Lure craft, Dead on and Moose ridge

injection molds. Enforcer, Angling AI, BTS and Do it are my top choices

i hope this helps, good luck, peace

  • Thanks 1
Link to comment
Share on other sites

On ‎3‎/‎12‎/‎2019 at 3:37 AM, Erick Darkman Prado said:

For inks I buy from Lure craft, Spike it ( Lure works)and Dead on plastic

for Glitter Lure craft and Spike it ( Lure works) 

plastic i am currently using Bait plastic ( Polysol) 

molds. Hand pour, Lure craft, Dead on and Moose ridge

injection molds. Enforcer, Angling AI, BTS and Do it are my top choices

i hope this helps, good luck, peace

I am familiar with BTS and Do it but does Enforcer, Angling and Al have websites?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top