poloaman Posted October 15, 2019 Report Share Posted October 15, 2019 Can you dip a pop max in the Alumilite UV with success without clogging gills and other holes in the mouth of the bait? Quote Link to comment Share on other sites More sharing options...
Grisley Posted October 15, 2019 Report Share Posted October 15, 2019 I’ve dipped pop maxes and similar baits with gill slits in the alumi-uv. You can either clean out the slits with a toothpick before curing it or clean them out afterwards with a dremel. The only problem with clearing them out before curing is that any clear coat that you get in the passages inside of the gill slits won’t cure. This leaves uncurred resin in the passages that would need to be rinsed out with some isopropyl alcohol. I’ve done both , but now I usually just clean them out with a dremel after curing. I just didn’t like the idea of having the uncurled resin sitting inside the passages of the bait and having to flush it out with alcohol, which could soften the topcoat. 1 Quote Link to comment Share on other sites More sharing options...
poloaman Posted October 15, 2019 Author Report Share Posted October 15, 2019 Thank you Quote Link to comment Share on other sites More sharing options...
