Jump to content
fishordie79

Making Your Own Eyes - I Have a Photoshop Template to Share

Recommended Posts

Hey TU Folks!

 I've learned so much from this community and have had a such blast interacting with you all that I thought I would try to give a bit back. I make my own eyes using waterslide paper, holographic foil, Photoshop, and epoxy. I cut the eyes out using different sized leather punches and one of the most difficult things for me in the past was getting the eyes themselves to print to the correct sizes, namely 10mm, 8mm, and 6mm. I have a friend who is a graphic artist and she came up with a Photoshop document that utilizes Smart Objects which allow you to click on one of three layers (10mm, 8mm, or 6mm) and embed whatever image of the fish eye you would like. The document then converts that image within the layer to the correct size for printing. No messing with print settings, image sizes, resolutions, etc. It takes a little bit of skill with Photoshop but nothing too complicated and I will gladly help anyone through it. 

 If anyone here would like a copy of this document with instructions just let me know. I'm happy to share it with you all!

 

Tight Lines!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top