Jump to content
Andyco

Lead weighting the line tie in crankbait lips

Recommended Posts

I can't tell you how to do this exactly as the Bagley's were done, but I have weighted diving lips. This was done by using a piece of solid core solder and drilling a hole in the lip just large enough for the solder to fit in snugly. You then fit a short length of solder in the hole and brad it so it flattens out on each side of the lip.

hope this helps..............Ben

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top