Jump to content
Tubeman

2" OD Injector - looking for a larger 12 to 20 oz injector

Recommended Posts

Does anybody know of a machinist or mold maker that manufacturers at 2 in outside diameter plastic injector ? I'm looking for one that shoots 12 to 20 oz. Thanks for your help.

Share this post


Link to post
Share on other sites

Quality Injectors on Facebook makes up to a 20oz. injector & can custom make larger ones. Bait Plastics/Polysol is a dealer for their injectors but don't know if they carry the 20oz.

  • Like 2

Share this post


Link to post
Share on other sites

Do not forget for the same size injection hole the injection pressure  goes up as the square.

Long and skinny cools faster.

MEL

  • Like 2

Share this post


Link to post
Share on other sites

I have a 12oz from quality injector, it’s not bad, I really like it. Unfortunately the O-rings it came with were garbage and weren’t useable after probably 10 uses, and I have not been able to find replacements (I think McMaster Carr sells them but not sure what size!) otherwise it’s a nice injector, not quality basstackle quality, but not far off

Share this post


Link to post
Share on other sites
7 hours ago, Canga~ said:

I have a 12oz from quality injector, it’s not bad, I really like it. Unfortunately the O-rings it came with were garbage and weren’t useable after probably 10 uses, and I have not been able to find replacements (I think McMaster Carr sells them but not sure what size!) otherwise it’s a nice injector, not quality basstackle quality, but not far off

Maybe try taking the whole thing to a plumbing supply place and seeing if they can fit it with the proper

size o ring.

  • Like 1

Share this post


Link to post
Share on other sites
On 2/9/2020 at 10:48 AM, seakarp said:

Maybe try taking the whole thing to a plumbing supply place and seeing if they can fit it with the proper

size o ring.

yeah I will get around to it at some point, I bought a 10oz from basstackle one of the times they have had them in stock in the last 6months or so, its great, at some point ill get an oring for the quality injector and use that too.

  • Like 1

Share this post


Link to post
Share on other sites

I thought I would give a review of the 12 oz 2in diameter barrel injector after a few uses. First off its fit and finish is a 9.5 out of 10. The plunger head uses 2 o rings, which along with the extra plastic inside gives a bit more resistance and requires a little more force to inject. I found pre heating the injector helps as well as a bit of lube behind the plunger so it works smoothly. I usually use a 5 gallon hot pot 3/4 full with the injector hanging inside to keep it warm and I'm sure it will work better when I get to running a larger run of baits. The barrel could use a grip section near the top as its smooth 2" diameter is a little hard to hold on to. The metal T handle is a definete upgrade over the plastic style knob found on other smaller injectors. Overall a very nice product that is probably the only big hand injector on the market.

1581862392803799893754986754048.jpg

15818624269894659685402189560337.jpg

Share this post


Link to post
Share on other sites
1 hour ago, Tubeman said:

I thought I would give a review of the 12 oz 2in diameter barrel injector after a few uses. First off its fit and finish is a 9.5 out of 10. The plunger head uses 2 o rings, which along with the extra plastic inside gives a bit more resistance and requires a little more force to inject. I found pre heating the injector helps as well as a bit of lube behind the plunger so it works smoothly. I usually use a 5 gallon hot pot 3/4 full with the injector hanging inside to keep it warm and I'm sure it will work better when I get to running a larger run of baits. The barrel could use a grip section near the top as its smooth 2" diameter is a little hard to hold on to. The metal T handle is a definete upgrade over the plastic style knob found on other smaller injectors. Overall a very nice product that is probably the only big hand injector on the market.

1581862392803799893754986754048.jpg

15818624269894659685402189560337.jpg

That thing is so big it made my monitor sag!  Hahaha

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top