Jump to content
RAW OUTDOORS

I want warts. Well on my jigs

Recommended Posts

Long time reader and now I need some ideas on how to put some raised warts on my jigs.  I see a bunch a companies are building jigs with epoxy dots that are raised up. Does anyone have any idea how to get this effect? 
 

 

E286B490-F4CF-4429-8CD0-10471DC3408E.jpeg

252B0DB5-404D-4ED4-8FFD-20C85CB25FE8.jpeg

F8481A0C-1B60-4BB7-AA10-35B0F1D5409A.jpeg

Share this post


Link to post
Share on other sites

I can think of two ways.  Put dye in a thick glue type epoxy like Devcon Two Ton, daub it on and , put on a lure turner for an hour, then allow it to cure for a day..  Second, put dye in some UV cured polyester resin, daub it on and cure in a UV lamp or outside in sunlight for a few minutes.

  • Like 3

Share this post


Link to post
Share on other sites

did this before on frogs. mix a little 5 minute epoxy with a DAB of paint for color , use a toothpick to apply a small drop to the lure, alternately hold lure upside down and right side up again. this will allow the droplet to raise to whatever size you need. with the 5 minute epoxy it will get rigid quickly but not completely cured. try it on a scrap piece and you'll get the idea. 

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top