AndrewB1983 Posted April 7, 2020 Report Share Posted April 7, 2020 Hello All, I am looking for help trying to find a mold that has the same head as the Do-It Shake-It mold in 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 but need it to work with the Gamakatsu 291 in sizes 2,1 and 1/0. I see the P/N SRH-6-A on the Do-it website but it references that it works with the Flat Eye 60° Mustad 32798 or the Gamakatsu 604 (90 degree)?? I know what I am looking for exists because I owned the mold and lost it. Any help would be great. Quote Link to comment Share on other sites More sharing options...
Good Fishing Posted April 8, 2020 Report Share Posted April 8, 2020 Andrew, Based on our test, the 291 will work in Do-It Mold SRH-6-A. It's not a perfect fit -- see the attached image -- but, at worst, you might have leakage around the hook eyes. Size-wise, here's what we think will work in each cavity: Size 2 - 1/16, 1/8 Size 1 - 1/8 (better fit than size 2), 3/16, 1/4 Size 1/0 - 5/16, 3/8 (3/8 is a little tight) Hope this helps. 1 2 Quote Link to comment Share on other sites More sharing options...
21xdc Posted April 8, 2020 Report Share Posted April 8, 2020 Barlows has the best mold and hook info on the planet... Thanks for all the help you give us! Mike Lohn 3 Quote Link to comment Share on other sites More sharing options...
AndrewB1983 Posted April 9, 2020 Author Report Share Posted April 9, 2020 Thanks alot Good fishing. Thats what I thought but its great to get your info before I place an order. Quote Link to comment Share on other sites More sharing options...
Good Fishing Posted April 9, 2020 Report Share Posted April 9, 2020 10 hours ago, AndrewB1983 said: Thanks alot Good fishing. Thats what I thought but its great to get your info before I place an order. Always happy to help! Quote Link to comment Share on other sites More sharing options...
