Cubbie Posted June 23, 2020 Report Share Posted June 23, 2020 (edited) So I'm going to be receiving my core shot mold from Angling AI soon (super excited). Does anyone have any tips for use? Main question I have is what do you suggest for lubricating the rods so they come out easy? Any other tips would be awesome. Thanks. Edited June 23, 2020 by Cubbie Quote Link to comment Share on other sites More sharing options...
huntryx Posted June 23, 2020 Report Share Posted June 23, 2020 worm oil. Keep the pins in a baggie with the oil that way they are always lubed. 2 Quote Link to comment Share on other sites More sharing options...
Les Young Posted June 25, 2020 Report Share Posted June 25, 2020 I brush worm oil on the rods for my tube molds & the core shot rods should work the same according to what i've saw. Quote Link to comment Share on other sites More sharing options...
Tlyons Posted May 10, 2021 Report Share Posted May 10, 2021 chapstick work real good Quote Link to comment Share on other sites More sharing options...
njones Posted May 10, 2021 Report Share Posted May 10, 2021 (edited) On 6/23/2020 at 9:10 AM, huntryx said: worm oil. Keep the pins in a baggie with the oil that way they are always lubed. I second this. It’s what I do and works well. nate Edited May 10, 2021 by njones Quote Link to comment Share on other sites More sharing options...
Canga~ Posted May 11, 2021 Report Share Posted May 11, 2021 i use cooking spray on my rods (both core shot and tube molds) it works great, super cheap and lasts a long time. i just spray it every time i inject, on a paper towel or hand towel, then roll the rods around to make sure they are lubed 1 Quote Link to comment Share on other sites More sharing options...
