Juice780 Posted July 12, 2020 Report Share Posted July 12, 2020 I’m always in the lookout for something else to try. I came across this website when looking for pearl powder to make my own pearl paint. If you have seen videos on Facebook of people using resin to make cool tabletop furniture this is probably the product. I was wondering if you thought this might work to dip lures in for topcoat? They have a lot of other kinds and even a boat/marine kind. Might be worth a try. https://www.theepoxyresinstore.com/collections/craft-and-jewelry-epoxy-resin/products/crystal-clear-epoxy-resin-with-uv-absorbents-clearcast-7050-epoxy-resin-system Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted July 13, 2020 Report Share Posted July 13, 2020 Just another Alumilite UV, or another Solar Res. I see no reason it wont work well. Quote Link to comment Share on other sites More sharing options...
BobP Posted July 13, 2020 Report Share Posted July 13, 2020 Nobody knows until they try it. I assume the reference to ‘uv’ means it has uv filters to protect the epoxy from yellowing, but it’s still just a two part casting epoxy, not a uv cure polyester. Quote Link to comment Share on other sites More sharing options...
Juice780 Posted July 13, 2020 Author Report Share Posted July 13, 2020 Yes you are eighth bob. I’m not sure it would work dipping unless you put it on a turner. I’m pretty sure any epoxy would require a turner or it would all run off. I could be wrong. Quote Link to comment Share on other sites More sharing options...
BobP Posted July 14, 2020 Report Share Posted July 14, 2020 It doesn’t seem practical to me to dip lures in epoxy, for cost reasons. Once it is mixed, use it or lose it. And yes, I would not use any epoxy without a lure turner. It’s possible to go without but it’s a big hassle to turn lures by hand for at least an hour. 1 Quote Link to comment Share on other sites More sharing options...
