Jump to content
Bassmaster Rick

Core Shot Molds

Recommended Posts

Hey Guys.  I'm making Senkos using the Angling Ai core shot mold. Nice mold. I've noticed that I'm getting some small flat spots in the outer plastic shoot. I don't think the fish are gonna notice it but I do. I'm injecting my first shot at 325-340 degrees and the second shot a little hotter as recommended. I let the first shot sit/set for 7-8 minutes or more before pulling the rods out. And then injecting the second shot. Any advice? Or should I not worry about it. Thanks.

Share this post

Link to post
Share on other sites

Shot cooler that should stop the denting.

I would shoot it around 320 and knock another 10° off that if it still keeps Denting you’ll find the Sweet Spot.



  • Like 2

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...