bobothewizard Posted January 21, 2021 Report Share Posted January 21, 2021 (edited) Any idea of a mold that is close to the keitech swing impact swimbait? I have a ripper mold but like me its to fat for my taste. Edited January 21, 2021 by bobothewizard Quote Link to comment Share on other sites More sharing options...
Frank Posted January 21, 2021 Report Share Posted January 21, 2021 Have you looked at the Basstackle version? It’s a little fatter but with fine detail. Quote Link to comment Share on other sites More sharing options...
Canga~ Posted January 21, 2021 Report Share Posted January 21, 2021 closest to a fat impact you will find is the 607 from bts, but at 350 for 4 cavities is very spendy. check out the rip from fat guys fishing, its slimmer than the doit ripper and comes in top inject and many more cavities, and more sizes than the bts! Quote Link to comment Share on other sites More sharing options...
Jig Man Posted January 21, 2021 Report Share Posted January 21, 2021 You might find something at Zeinners. Quote Link to comment Share on other sites More sharing options...
jigmeister Posted January 21, 2021 Report Share Posted January 21, 2021 These molds are made in Ukraine . Keitech Swing Impact Fat Soft Plastic Bait Mold Mould Shad DIY Lure 38-125 mm | eBay Quote Link to comment Share on other sites More sharing options...
Cami Posted January 22, 2021 Report Share Posted January 22, 2021 Here there are the "original" ones https://baitmold.com/page/1/?s=swing+impact&post_type=product Bye. Cami Quote Link to comment Share on other sites More sharing options...
