Chauncy kerstiens Posted February 4, 2021 Report Share Posted February 4, 2021 (edited) I am new to this site and build lures when I get time . This lure was originally a smaller jitter bug I carved with a razor blade , but I switched directions to a glider/dog walker. I added one small cone weight in the tail and a larger cone 3/4 of an inch ahead. The center of balance was the midpoint, after I added the weights it sits tail slightly down witch is what I wanted, but there's too much ice to fully test and fine tune. if anyone has any input id appreciate it! I'll post a pictures as well. Edited February 4, 2021 by Chauncy kerstiens Quote Link to comment Share on other sites More sharing options...
Chauncy kerstiens Posted February 4, 2021 Author Report Share Posted February 4, 2021 Quote Link to comment Share on other sites More sharing options...
Chauncy kerstiens Posted February 4, 2021 Author Report Share Posted February 4, 2021 Got it sealed , she doesn't need paint 1 Quote Link to comment Share on other sites More sharing options...
Hillbilly voodoo Posted February 5, 2021 Report Share Posted February 5, 2021 I assume it’s for bass 1 Quote Link to comment Share on other sites More sharing options...
Anglinarcher Posted February 5, 2021 Report Share Posted February 5, 2021 I predict it will walk very well, but will not glide much. Most of my gliders are best if they are more torpedo shaped and thinner for less drag on the glide. Still, I like it and would fish it as a walker any time I could justify it. 1 Quote Link to comment Share on other sites More sharing options...
Chauncy kerstiens Posted February 5, 2021 Author Report Share Posted February 5, 2021 Thanks, I just used a knife and a sandpaper by hand I don't even use a block it seems like it's easier if that makes any sense haha , I'll have to make a glider cause I forgot what they even did lol Quote Link to comment Share on other sites More sharing options...
