Jump to content

- - - - -

Foam baits with molded in lips

  • Please log in to reply
60 replies to this topic

#61 barramundi



  • TU Member
  • PipPip
  • 25 posts

Posted 02 March 2005 - 01:02 AM

Hi Husky,
Darkstar is not having ago at us.When you get the lip design right have them laser cut.In Australia it cost me $40 per 100 for 2mm. thick poly-carbonate lips with a 6mm. hole in them.When the foam expands around them they don't come out.This is one of my major sales advantages.I also run a 1.2mm stainless full harness wire with 4x V.M.C. hooks.A customer recently brought one back that he used on Cape York.Right up there in mongrel country.Anyhow it lured 2 barracuda 5 trevally 2 estuary cod and a mangrove jack.The poor bugger's got a lot of denture holes in it but is still serviceable so I gave him a new one and use his as a demo at the local markets where I have a stall.And mate if you come down, you've got to fish Weipa.It's right on the northern tip of Oz.Just punch it in to "google"and you'll see what I mean.