Jump to content
5 fish on

bubble under finish

Recommended Posts

The bubble is not from moisture. It is from air trapped in the pores of the wood. Wipe the bait with polyurathane on a rag and let it dry. Then touch sand the surface of the bait and wipe any dust off. The bait is ready to paint. You cannot get rid of the bubble to where it won't be seen at all by doing a spot fix. But this is the best way to do it. Put some epoxy on a toothpick and put it in the dimple. Cover the wet epoxy with a piece of scotch tape. After it is cured then just peel off the tape. It will come up fairly easy.

Skeeter

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top