Jump to content

- - - - -

Auto Clear

  • Please log in to reply
2 replies to this topic

#1 Cliff



  • TU Member
  • PipPip
  • 77 posts

Posted 16 February 2005 - 08:58 PM

Not trying to start another clear coat debate, but has anyone tried the 2 part urethane auto clear sprayed through an airbrush? I know the custom motorcycle helmet guys that use createx autoair use it and is recommended by createx for their autoair line. Cliff

#2 nova


    Advanced Member

  • TU Member
  • PipPipPip
  • 2,748 posts

Posted 17 February 2005 - 12:01 AM

I have; years ago. The clear I used was 3 parts; clear-reducer-catalyst.
Worked quite nicely but in order to get depth you had to put 3 or 4 coats. It held up pretty well also.

#3 Celticav


    Advanced Member

  • TU Member
  • PipPipPip
  • 726 posts

Posted 17 February 2005 - 04:24 PM

I use it all the time, as nova stated it does take several coats, better to have alot of thin coats than one thick coat. It is not as cheap as epoxy but is very resilient and looks slick, JIM