Jump to content
paasche flow pencil?
7 replies to this topic
Posted 07 March 2005 - 02:38 PM
think it was around $40...might be the deal for craw patterns, back stripes, vertical striping, gill highlights.
Posted 08 March 2005 - 03:41 AM
Looks good! Bet you need a steady hand for a proper ussage. If someone is going to try it he should let us know how it does.
Posted 08 March 2005 - 07:06 AM
One of our friends has one that came in a three gun airbrush kit and she never uses it, it is tricky...you have to know your paint is perfect and it works best for long straight lines like penstripes. It is basically just an overgrown fountain pen. There is an optional cup that is spring assisted which would be great, but it costs more than the gun does, JIM
Posted 09 March 2005 - 12:55 AM
Thanks for the info Jim. May still pick one up for kicks and giggles. If it doesn't work out...there's always ebay.
Posted 10 March 2005 - 10:42 PM
She got hers in a 3-pack with a single action H and a larger cup gun, both of which have plenty of uses and she paid under $60, hard to beat that. I use the cup gun all the time, as soon as I can I will do some test stripes on some regular size cranks with the pencil and post a pic of what I end up with, later, JIM
Posted 11 March 2005 - 01:33 AM
This might work with inks and stripping enamel, but fast drying paints such as lacquer might present problems. If this unit operates similar to others manufactured over the years, it will require a considerable degree of skill to acheive good results. Assorted stripping brushes and one shot stripping enamel could with skill produce the same results.