earthworm77 Posted March 12, 2005 Report Share Posted March 12, 2005 You've got to decrease your salt. The plastic when flowing properly will seep into the flap and fill it up correctly. Quote Link to comment Share on other sites More sharing options...
NJFishRGuy Posted March 13, 2005 Report Share Posted March 13, 2005 I'm going to give that a try, along with adding a little softener and heating a bit more. Quote Link to comment Share on other sites More sharing options...
earthworm77 Posted March 17, 2005 Author Report Share Posted March 17, 2005 I have the mold in all three sizes. I also have the aluminum which is a dream to use. The smaller LC mold is very narrow. I'm thinking about getting my Xacto knife and widening the flaps slightly to allow for easier filling. I made a mold out of water putty and I totally customized the flaps and it worked out really nice as the baits took on a different form. Quote Link to comment Share on other sites More sharing options...
kbiddle Posted March 28, 2005 Report Share Posted March 28, 2005 Earthworm where did you get the alluminum mold I have been trying and trying and trying to get my hands on one to now avail.... Help please? Thanks Kevin Quote Link to comment Share on other sites More sharing options...