Sign in to follow this  
Followers 0
Husky

Table Top Epoxy

13 posts in this topic

That is where I buy my epoxy from.....I buy the thickest viscosity they offer, and mix it with some thinner stuff for the winter months here. Be aware..the hardener that they use is super slow. I have better luck using Devcon hardener with USC resin. You need to play around until you come up with a combo that works for you. This stuff tends to trap a lot of bubbles also. Haven't found the perfect epoxy for what we do yet. Too slow and we get to look at the lure for days before we can touch it. Too fast and it separates from the basecoats We need to have a chemist friend like Hughes does.

Share this post


Link to post
Share on other sites
You have found the perfect epoxy....

You just do not know the secrets to using it yet.

How about a Tutorial on it. There is nothing worse than having a Top Coat go bad, after working to get everything else perfect.

TIA

Share this post


Link to post
Share on other sites
The Devcon detoxic center is open to all.

Got a link??? :?: I know you're the man, lead us out of our maze. :idea:

Share this post


Link to post
Share on other sites
You have found the perfect epoxy....

You just do not know the secrets to using it yet.

No such animal exists. All clear coats have their pros and cons. Some work better for certain applications. A lot is personal preference. Unless your plugs never see water or don't catch fish, all clear coats will eventually be destroyed.

Andrew

Share this post


Link to post
Share on other sites

Let's see....... we had Etex, Spraying Etex, Moisture Cured Urathane, and now the greatest epoxy there is. :rolleyes: If I were you guys I would not delay and make my appointment at the detox center NOW !!!

Skeeter B)

Share this post


Link to post
Share on other sites

Skeeter open your mind man.......... B)

E-tex is still what I use.

Still working to figure a way to get you a sample of the MCU.

But on the outs with the maker of the product.

Share this post


Link to post
Share on other sites
Let's see....... we had Etex' date=' Spraying Etex, Moisture Cured Urathane, and now the greatest epoxy there is. :rolleyes: If I were you guys I would not delay and make my appointment at the detox center NOW !!!

Skeeter B)[/quote']

As long as it's not Devcon, I'm all for it! :lol:

Share this post


Link to post
Share on other sites

The Etex Devil is right. I am pretty closed minded. But there is a reason for that. I have been on this type of a site now for almost 5 yrs. I have seen and tried alot of different things, and so have alot of other people. Not that I have tried it all...... but I am done with it for awhile. In over 4 yrs. of making baits I have had only two baits fail due to the clearcoat. They were both my own personal baits. I have Never had a bait returned due to a clearcoat failure. That is good enough for me. I had to put my 2 cents in on this thing. You gotta understand that. You gentlemen have fun. I wish you success.

Skeeter B)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0