vishezfish Posted June 21, 2005 Report Share Posted June 21, 2005 Do u guys add the black to the plastic before or after u haet the plastic? When I add the black to the clear hot plastic I get...... Black!!! Quote Link to comment Share on other sites More sharing options...
woodsac Posted June 21, 2005 Report Share Posted June 21, 2005 How much black are you adding 1 drop per ounce is plenty for a light smoke. I always heat 4 oz at a time. Sometimes I only use 1 or 2 drops of black in 4 oz. Just depends on how dark I want it. I add all of my color before I heat. That way all the colors get the same amount of time in the heat. The colors never very. Quote Link to comment Share on other sites More sharing options...
vishezfish Posted June 22, 2005 Author Report Share Posted June 22, 2005 I add 2drops to one cup.... How do you see the ggrey in the clear? Quote Link to comment Share on other sites More sharing options...
woodsac Posted June 22, 2005 Report Share Posted June 22, 2005 Hmmm That part sounds good? If you compare that to 1 cup with no coloring, it should only look slightly tinted. Barely noticeable. But when you start to add glitter and put that smoke up against another color, it is even more noticeable. Try adding a little black flake to that and pour it over another color. You should see a pretty big difference. I hope Quote Link to comment Share on other sites More sharing options...
vishezfish Posted June 22, 2005 Author Report Share Posted June 22, 2005 Thanks I'll try it! I'm gonna also add the color before heating....! :grin: Quote Link to comment Share on other sites More sharing options...