kbkindle 0 Report post Posted July 20, 2005 kbkindle. this is the kind of lure painting booth i a'm going to make dont know what size yet but, puting motor on side with dry ing wheel in hood we know we want heat in booth and a lot of light. what would be wrong with on top or back with a hole in booth and install a heat lamp to out side of booth where you would get light and heat. Share this post Link to post Share on other sites
LaPala 4 Report post Posted July 20, 2005 See this DIY Paint Booth article: http://www.interlog.com/~ask/scale/tips/booth.htm Share this post Link to post Share on other sites
kbkindle 0 Report post Posted July 21, 2005 yes that was the exact pic of what i a'm going to build. i dont know what size yet. and i was asking in other post if a guy should or is it necessary to put a heat lamp on out side of booth and let the light in and heat. i have a wood working shop in back yard with about all the wood working tools made i do wood working in the winter but fish all summer. just going to give this luremaking a try. this is last project in wood shop Share this post Link to post Share on other sites
Tally 1 Report post Posted July 21, 2005 if you are going to be using water based paints, then have at it. Build it the way you want although I don't think a heat lamp is necessary. If your are going to be painting with anything else that might have fumes that could explode, then be very careful. Tally Share this post Link to post Share on other sites