fishin4eyes Posted July 21, 2005 Report Share Posted July 21, 2005 I'm new to this site and looking for some help. I want to start pouring my own plastics, but don't know where to start. Can someone point me to some suppliers and possibly some instructions? I would also like to know if someone could help with information on making good molds or copying a favorite bait no longer available. Thanks! Quote Link to comment Share on other sites More sharing options...
GB GONE Posted July 21, 2005 Report Share Posted July 21, 2005 Welcome to TU!!!! The first topic in the Soft Plastics area is a "Read This Before You Post" subject. Read and re-read this information that has been compiled!! You will get almost everything you need to get started from these 2 areas. Next, go to the the How-To area in the toolbar above and get to reading the tutorials. After all your reading, you will either be overwhelmed into submission OR ready to be addicted to one of the coolest "hobbies" out there!!!! Have fun and also don't forget the TU Search area. Any other info you could ever want can be found by doing a search in this area!!!! Jim Quote Link to comment Share on other sites More sharing options...
harley-cowboy Posted July 22, 2005 Report Share Posted July 22, 2005 Soft Plastics 101 will get you started... from there, follow Ghost Baits ( Jim's ) advice. You will have ALL the info you need to start your head spinning..... THEN READ IT AGAIN & AGAIN. When you are done, there are many GREAT guys in here to help you with questions not covered... Like Jim said... Don't forget to do a search for your specific questions. GOOD LUCK... Quote Link to comment Share on other sites More sharing options...