PUNKYMAGIN Posted August 15, 2005 Report Share Posted August 15, 2005 hey guys wonder if you could help me w/this one i have some plastic blanks that i wanted to pint with createx but when i did the pint wiped right off...do i need to prime these with something??? Quote Link to comment Share on other sites More sharing options...
cullin8s Posted August 15, 2005 Report Share Posted August 15, 2005 createx is not a stand alone paint, it has to be clearcoated if your using it on a lure. Quote Link to comment Share on other sites More sharing options...
Terrydabassman Posted August 15, 2005 Report Share Posted August 15, 2005 Hope this helps ya, well at least this is what I do. I sand the seams with 800grt sandpaper, then white primer coat...can be white Createx. After the initial paint scheme I then shoot a coat of Createx Clear Coat. The reason I do this is because if I mess up on an eye, a gill, shad spot...whatever, I can easily wipe it off without messing up the initial paint scheme. I've had to start over many many times on an other wise great paint job because I didn't know about the "clear coat". Then after the clear coat I add the eye's, gills, shad spot....what ever. Then top coat with Devcon 2 Ton epoxy you can find at Wall-Mart for $1.97 a tube. I also help things along with a hair drier on the paint and the clear coat....not the Epoxy. Quote Link to comment Share on other sites More sharing options...
PUNKYMAGIN Posted August 15, 2005 Author Report Share Posted August 15, 2005 thx guys this will be a great help Quote Link to comment Share on other sites More sharing options...
