dsmblack Posted August 19, 2005 Report Share Posted August 19, 2005 Does anyone make a mold for the Big Dead Ringer(I believe it is 8 in.) made by Zoom. Quote Link to comment Share on other sites More sharing options...
GB GONE Posted August 19, 2005 Report Share Posted August 19, 2005 I have one in plaster as that is an AWESOME worm to throw!!! Give me a black red anyday!!!! It doesn't come out as good as the original bait as the big tail is not supprted well by the smaller worm body.... If you get one done, let me know and I will be a customer!!!!! Jim Quote Link to comment Share on other sites More sharing options...
dsmblack Posted August 21, 2005 Author Report Share Posted August 21, 2005 Jim, you are correct about it being an awesome bait. I have some black/red on the boat but havent thrown them much. Try a black grape after dark. The largemouths are killing them here in WV. I may try to make a plaster mold myself. Do you have any advice on how to make a plaster mold? Quote Link to comment Share on other sites More sharing options...
GB GONE Posted August 21, 2005 Report Share Posted August 21, 2005 I just mixed up the plaster of paris and gently pressed the bait down in...Refer to the tutorial on plaster molds. I don't use any type of release agent, just take the bait out after about 30 minutes but be gentle... Use auto high heat paint from Walmart to coat the cavity and wait at least 48 hours before you pour... A one sided version of this bait just really doesn't do it justice...I may try to mold a 2 sided IF I ever get time to get away from just pouring!!! Let me know if you do one!!! Jim Quote Link to comment Share on other sites More sharing options...
