2 replies to this topic
Posted 28 January 2006 - 12:02 AM
i have been using a cutoff wheel on a dremel tool to cut my crank lips.but it leaves allot of melted plastic on the edges.
my question is how do i Polish the sides of the lip.and is there a better tool to cut the lips with.thanks guys.
Posted 28 January 2006 - 12:30 AM
Coley's tutorial on how to cut and shape lexan diving bills can be found here:
One extra step I do when using this method is to sand the sharp edge off the lexan before installing. This helps avoid the line getting cut by the diving bill while fighting big ones.