Jump to content
finlander

Etexing w/o dive lip installed

Recommended Posts

I want to clearcote a foil lure but I want to make the lips interchangable. I have made a larger rack hooked up to the new rotissiere motor. Any suggestions would be appreciated. I want to spin these w/o the kip installed. That was to be the way I wanted to mount the lures to this new rack...clapping them by the lip to the rack. Hope this helps. :?

Link to comment
Share on other sites

why not attach by the back of the lure and then cut the lip slot after the epoxy sets? if you cut the slots for the lips about 24 hours after curing before the epoxy gets fully cured you will get cleaner slot, as it cures further it becomes tougher to get good slot cut as epoxy becomes harder (brittle)

b9_1_sbl.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top