Jump to content
feathercast

poppoer face

Recommended Posts

there is a special grinding bit to fit on a drill. it is sherical in shape...i'm not sure what it's called but i think u can find it in a hardware store.

do u have an aquarium? have u seen a round air stone? it looks exactly like that, with a stalk to fit into the drill.

they come in many shapes. some spherical, some shaped like a cone.

hope this helps :)

Link to comment
Share on other sites

Try this for EZ popper faces. After finding the center of the face, I use a countersink for my first step It will make a cone shape hole in the front of the bait. Next, I use a router bit that is an inside full round. I use it to enlarge the cone shape hole and round off the inside face of the bait. Both of these bits I use in a homemade set up. A small motor attached to a mounting board with a drill chuck added and a foot pedal from an old sewing machine for variable speed. Good Luck, Joe

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top