Brad Posted March 4, 2006 Report Share Posted March 4, 2006 Can I modify a Do-it mold or is that beyond the capabilities of a dremel? I want to modify the mold to accept a .062" wire but I don't want to spend the money if I'm just going to ruin the mold. Thanks Quote Link to comment Share on other sites More sharing options...
nova Posted March 4, 2006 Report Share Posted March 4, 2006 Been there; done that. Just take your time and have a steady hand. Think twice; cut once.lol Quote Link to comment Share on other sites More sharing options...
dtrs5kprs Posted March 4, 2006 Report Share Posted March 4, 2006 And if you think once (or less) and have to cut 3 or 4 times, well... there is always JB Weld to make you feel better about it. Quote Link to comment Share on other sites More sharing options...
Richoc Posted March 4, 2006 Report Share Posted March 4, 2006 Get a small needle file for that. You will be happy with the end result. Just take your time , you still want it to hold thewire in place for you during the pour. Quote Link to comment Share on other sites More sharing options...
Mr B Posted March 7, 2006 Report Share Posted March 7, 2006 I use a small triangular file to open up the wire slots. If you have a drill bit smalll enough that will work great also. I use drill bits to open up the hook slots to accept larger hooks. Mr B Quote Link to comment Share on other sites More sharing options...