Jump to content
RangerZ

Sandblasting

Recommended Posts

Glass beads will not take ridges in plastic off. Crushed glass is slightly more aggressive but only "dulls" ridges but will not cut good gel-coat Rogues. The "thin paint" Rogues are quickly cleaned.

Do a search on this site and you should find this info and info about "wiping" paint off with MEK.

Have you tried just priming and painting over one(Rogue) and using one or two thin coats of epoxy? You may be surprised. I was. Suspend nicely.

Link to comment
Share on other sites

Onlybass, I did the search and found the tip about MEK. The reason I was asking about the sandblasting is that I did a Staysee for a guy and it had a tendency to sink a little. I haven't actually tried a Rogue yet, was trying to keep them as original as possible. Thanks for the reply.

Chris

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top