basser_jim Posted March 22, 2006 Report Share Posted March 22, 2006 Look out Tru Tungsten here I come Quote Link to comment Share on other sites More sharing options...
robbor Posted March 22, 2006 Report Share Posted March 22, 2006 did you just paint a tungsten weight or did you make the weight also. I personally dont thing painting the worm weight would make any differance. They look nice though. Quote Link to comment Share on other sites More sharing options...
basser_jim Posted March 22, 2006 Author Report Share Posted March 22, 2006 I just powder painted them.. Quote Link to comment Share on other sites More sharing options...
dtrs5kprs Posted March 23, 2006 Report Share Posted March 23, 2006 Do those have the plastic inserts, and if so, how did you keep them from melting shut? I've had the same thoughts about those weights. They are just a little too shiny for clear water. I've had lead and black brass outfish them when shaking worms in clear water for deep kentuckies. Quote Link to comment Share on other sites More sharing options...
Mr B Posted March 23, 2006 Report Share Posted March 23, 2006 I imagine you could use a piece of spinnerbait wire thats will fit inside the tubing. Put a small 90 deg bend in the end of the wire to hold the weight on. Heat, Dip, let cool and pop off the wire. Mr B Quote Link to comment Share on other sites More sharing options...
basser_jim Posted March 23, 2006 Author Report Share Posted March 23, 2006 I used a paper clip Quote Link to comment Share on other sites More sharing options...
