lunker05 Posted December 28, 2006 Report Share Posted December 28, 2006 Is there somewhere to get some of those corkscrew worm holders that are on some shakey heads and if so what is the best way to attach them to your jighead Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted December 28, 2006 Report Share Posted December 28, 2006 They are called Screw Locks and you can get them from Barlows. They come in two sizes medium and large. I make arkie jigs with screw locks for bait keepers. I cut the little "dog leg" off the u-bend end of the wire then bend them so they will friction fit into the weed guard hole. After you get them to fit reasonably well without falling out remove them and glue them in with epoxy. Quote Link to comment Share on other sites More sharing options...
Maddoglures Posted December 30, 2006 Report Share Posted December 30, 2006 We use three different styles and sizes in our Shakey Jigs. We also sell in bulk. You can view our Shakey Jigs at dmcustombaits.net (Ebay Store) We have Custom Hitch-Hiker, and Twist-Lock Wires. Dale Quote Link to comment Share on other sites More sharing options...
jigfisherman Posted December 30, 2006 Report Share Posted December 30, 2006 I use a straight piece of wire, and twist it after I have poured and painted my heads. You have alot less mold modifications by doing it like that. Quote Link to comment Share on other sites More sharing options...
