Shawn M Posted December 31, 2006 Report Share Posted December 31, 2006 Hi guys. I used transparent powder paint for the tandem blade and holoform tape for the main blade on a couple SBs I put together. My question is; do you need to put epoxy on the blades or not? Shawn Quote Link to comment Share on other sites More sharing options...
M.Bassitt Posted December 31, 2006 Report Share Posted December 31, 2006 From what i know about Powder Paint on jig heads, i would Bake the Blade. Alot of difference between baked and unbaked using powder paint. As for the tape it could not hurt, i would use a thin coat of epoxy, or you might try ''Sally Hansen, Clear Nail Hardener '' nothing but cheap laquere paint, but it is tough and cheap, like 2 bucks a bottle. Hope this HELPS Mike Quote Link to comment Share on other sites More sharing options...
dampeoples Posted December 31, 2006 Report Share Posted December 31, 2006 I think they recommend coating it with something, I wouldn't use epoxy, something thinner maybe. Quote Link to comment Share on other sites More sharing options...
Shawn M Posted December 31, 2006 Author Report Share Posted December 31, 2006 Thanks for the quick responses!! I did bake the blade after pp. I put epoxy on, but it was a real pain. I like the idea of the nail polish, I have a bottle of "no chip top coat" I used for sealing thread after dressing some treble hooks. It should definitly be easier to use than the epoxy. Thanks again!! Shawn Quote Link to comment Share on other sites More sharing options...
