Jump to content
Husky

Photo Finishing Foil and Faux Finishes Tutorial

Recommended Posts

I've gotten a few requests so here's a copy of what was lost in the crash:

The following Tutorial is for those of us who want to create very realist finishes with a minimum of hassle. This is not to say it is the only or best way to achieve that goal, but I found it to be a very viable alternative to decals, and much less costly. Truth be told, I also find it easier to do. In addition, the supplies are more readily available. With very little practice, anyone can get wonderful results. I developed this technique after realizing that it is not practical to print on foil. Doing so, is a tribute to Murphy

Share this post


Link to post
Share on other sites

Thnaks again too! I forgot that spray adhesive was used. I have been using a 5 min epoxy to put the foil on the body. Too thick at messy. I will try the spray next. Bruce

Share this post


Link to post
Share on other sites

Thanks for a repost of the tutorial. I am just starting to make wooden baits. I wonder if a tutorial section could be set up to place this in?

Thanks again

Share this post


Link to post
Share on other sites

Can this technique be done on the plastic bodies that many of the sites sell? I've just started getting into tackle making and I'm a computer whiz. So taking photos or creating my own graphics in Photoshop is what I do daily.

Share this post


Link to post
Share on other sites
Can this technique be done on the plastic bodies that many of the sites sell? I've just started getting into tackle making and I'm a computer whiz. So taking photos or creating my own graphics in Photoshop is what I do daily.

Absolutely. You just have to size the images to fit the bodies, which for you, should be a cinch!

Share this post


Link to post
Share on other sites
Absolutely. You just have to size the images to fit the bodies, which for you, should be a cinch!

Sweet, I'll have to look into that. I haven't had to much luck catching fish on crankbaits yet, but I just got back into fishing alittle over a month ago.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...
Top