Jump to content

- - - - -

looking for a jig mold

  • Please log in to reply
3 replies to this topic

#1 Jigsbydirk



  • TU Member
  • PipPip
  • 23 posts

Posted 22 January 2007 - 08:16 AM

Hello everyone, I was just referred to this site and I am impressed. Anyway, I am looking for a used mold that will pour 1/100 oz roundhead jigs. If anyone knows anywhere I can get one other than a do-it made coach, I would appreciate the information. Thanks for any help.

#2 LedHed


    Advanced Member

  • TU Member
  • PipPipPip
  • 813 posts

Posted 22 January 2007 - 12:23 PM

Hilt's Molds makes a 1/100th roundhead. Have seen them on ebay. You can probably order it from a distributor.

#3 Fatman


    Advanced Member

  • TU Member
  • PipPipPip
  • 622 posts

Posted 25 April 2007 - 01:55 PM

You can also check Do-It molds they are expensive though as one in that size is considered a professional model mold

#4 crappie35


    New Member

  • TU Member
  • Pip
  • 4 posts

Posted 03 May 2007 - 07:56 PM

I have 1/80th oz. and 1/100th oz. molds. They are Hilts trout head mold. No collar on jig. You can try Hilts website or watch E-bay. I got both mine off of E-bay. Little tip...if you want to run a larger hook than what the mold calls for..drill out hook eye cavity and also cut a piece of wood the same hgt as the mold when the mold is open and lying flat. This keeps longer hooks stationary better until mold is closed.Just but the pc. of wood up against the bottom of the mold helps keep hook from tipping.