Jump to content
g2072

Topcoat Question Devcon

Recommended Posts

I just painted my first baits and put the Devcon 2 ton epoxy on them and put them on my turner. After they had set up I noticed a few thin or very small bare spots where I didn't get much clear. If I want to put another coat of Devcon on do I need to sand or just coat over the first coat.

Link to comment
Share on other sites

Lightly scuff finish with steel wool or scotchbrite,Make sure to wipe very clean before recoating. The dimples or thin spots are more than likely from oily fingers or some other contaminent.The scuff marks will disapear for the most part.Also a variable for this problem is the dryness of your paint.Some may not agree but as a rule to myself,no matter how excited I get wanting to see the end results of my work I always wait a day after painting to clearcoat.We put a lot of time in these things for a couple of dimples or bubbles to discourage us with our work. Good Luck

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top