skeeter jones Posted January 30, 2007 Report Share Posted January 30, 2007 I want to make a jig head using epoxy or hard dense material. What material do you use to make a mold for epoxy and what release agent would you use. Quote Link to comment Share on other sites More sharing options...
dtrs5kprs Posted January 30, 2007 Report Share Posted January 30, 2007 RTV silicone will work. Just make sure you use a silicone compatible material to construct your proto head. You can use a spray or brush on mold release, or light application of talc. Fiberglass resin will work as your pouring material, or you can upgrade to one of the 2 part liquid plastics from smooth-on, US composites, etc. Those are a little more $$$ but easier on your mold than the resin -> longer mold life. Also a littel faster, cleaner, and easier to work with. Quote Link to comment Share on other sites More sharing options...
