Frank Rizo Posted February 26, 2007 Report Share Posted February 26, 2007 Floating jig heads are costly, so I created a way to make my own floating heads by using Great Stuff foam in my molds. You have to leave the mold sit till the foam has cured. After you get the jig out of the mold you must dip it in an oil base paint. You can use a wood rod to hang them on over night to cure before painting the eyes on. good luck and let me know how yours work out BUT please no profiting from this great idea Because it is mine:) Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted February 26, 2007 Report Share Posted February 26, 2007 Is this the same as the idea fish n fool discussed a week ago. Balsa and foam were discussed as a flotation aid. http://www.tackleunderground.com/forum/showthread.php?t=8410&highlight=foam I may be wrong, I don't do plastic or wire baits (yet). I didn't think that the idea was that original, but some times the simplest thing is overlooked. Quote Link to comment Share on other sites More sharing options...
