fatfingers

Repairing a Walmart BBQ rotisserie lure spinner

3 posts in this topic

I fixed mine when it started "slipping" like they have a tendency to do.

I took it apart. There's an apparatus into which the rod slides. I put a screw into it so it would tighten up nicely. Then I applied some black tape to the chrome rod that fits into it.

It is now tight and smooth running and should be good for another 100,000 miles.

Don't be afraid to take yours apart, if you have one of these. The repair was easy and as soon as you look at inside, you'll see what I'm talking about.

Share this post


Link to post
Share on other sites

hey fat fingers kb here starting to have the same problem after it turns about a 3/4 turn then it fall the rest of way where like you said something is wearing out inside will take mine apart and fix thanks for the tip kb

Share this post


Link to post
Share on other sites

Let me know if you have any problems after you look at it. There's a piece in there that needs a "set screw" to make it grip the rod that spins. Also the rod that spins is a bit of a sloppy fit so a bit of electrical tape around the end of it seems to take the play out of it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now