skeeter jones Posted May 18, 2007 Report Share Posted May 18, 2007 I was wondering if any one has tried to make a reverse crank bait. I am playing with the idea of a lure that is weighted that will sink to the bottom and then upon retrive will shoot up to the surface. Im not sure where the weigh should be placed. I was going to place a lip on the top of the lure. I've use some chatter baits and they have the lift but not the profile . Any ideas or info would be great. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted May 18, 2007 Report Share Posted May 18, 2007 No need to change the design of a steep lipped, shallow swimming lure, other than increasing the ballast. Just allow it time to sink to the depth you want. Quote Link to comment Share on other sites More sharing options...
Palmetto Balsa Posted May 18, 2007 Report Share Posted May 18, 2007 I have seen a flatsided bait with the lip and all that the guy put the chatter blade on the nose tie and used the blade as the line tie. I just looked at it. He and another guy claimed that it worked. Quote Link to comment Share on other sites More sharing options...
