kelly Posted June 22, 2007 Report Share Posted June 22, 2007 I used #2 spinner Colorado blades. cons- you half to drill two holes. pros- you dont have to drill three holes;), it is in a all ready cut to shape, one side is cupped the other is rounded for two different actions, you have alot of sizes and shapes Colorado, Indiana, willow leaf and others. stickers cut for most sizes, there is the perfect size for 1/16 oz or the 1 oz jig, cheap buy 100 for 2 or 3 bucks, buy in bulk at 1000, dose not have 5 sides. ps I have found that if you use the cupped side it tends to hunt back and forth so if you just want it to shake use the rounded side. Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted June 23, 2007 Report Share Posted June 23, 2007 Have you tried a deep cup colorado blade??? Quote Link to comment Share on other sites More sharing options...
kelly Posted July 10, 2007 Author Report Share Posted July 10, 2007 No I have not. But from what colorado blade dose I would think it it would move all over the place. Very erratic might be what you want! My apologies for late response hard drive crashed!!!! then microsoft told me my xp was no longer good with the new hard drive and needed to go genuine. So I went with vista good program but they Know they have you! For give me had to complain a little. Quote Link to comment Share on other sites More sharing options...
