Haulin'Bass Posted July 3, 2007 Report Share Posted July 3, 2007 Does anyone one know how to use glitter with powder paint. I tried to add glitter to my powder paint and dip my jigs but it never comes out right. Then I tried to sprinkle it on before the jig cooled and after I powder paint. Wondered if anyone knew of an easier way to add glitter and use with powder paint. Quote Link to comment Share on other sites More sharing options...
jigfisherman Posted July 3, 2007 Report Share Posted July 3, 2007 I have added it to my paint and it works pretty good, but you have to add alot to get it to do right. I have also bought fine glitter at Hobby Lobby and added it to a bottle of clear powder paint to dip my jigs in after I dip them in my paint and works well that way. Quote Link to comment Share on other sites More sharing options...
dampeoples Posted July 3, 2007 Report Share Posted July 3, 2007 I would think that the key would be a smaller glitter, one that would suspend well if in a fluid bed, and not settle to the botto quickly if dipped. Quote Link to comment Share on other sites More sharing options...
Haulin'Bass Posted July 3, 2007 Author Report Share Posted July 3, 2007 I will try that. Thanks,Jeff Quote Link to comment Share on other sites More sharing options...
redsnooktrout Posted July 3, 2007 Report Share Posted July 3, 2007 I add 2% to 6% of flake........ 6% is a bit on the high side Quote Link to comment Share on other sites More sharing options...
LedHed Posted July 3, 2007 Report Share Posted July 3, 2007 Haulin'Bass Make sure the glitter you are using can take the high temp. You can buy PP pre mixed with glitter. Columbia Coatings has a great holograph glitter. Quote Link to comment Share on other sites More sharing options...
rsinyard Posted July 4, 2007 Report Share Posted July 4, 2007 I will second LedHed's advice if we are talking about the same columbia coatings in columbia TN. I bought some from them and it works great. I use the Lapis to give my jigs a blue shimmer. Quote Link to comment Share on other sites More sharing options...
jigfisherman Posted July 4, 2007 Report Share Posted July 4, 2007 Where is Columbia Coatings at in Columbia? I live in Lawrenceburg I need to check them out if I can find them. Thanks, Brad Quote Link to comment Share on other sites More sharing options...
dampeoples Posted July 4, 2007 Report Share Posted July 4, 2007 Here is their site Quote Link to comment Share on other sites More sharing options...
cadman Posted July 5, 2007 Report Share Posted July 5, 2007 Haulin'Bass, I have had very good success with Herbie's Magic Dust. Their powder glitter is very fine, and covers well. www.herbiesmagicdust.com Quote Link to comment Share on other sites More sharing options...
buckslayer Posted July 5, 2007 Report Share Posted July 5, 2007 TJ's Tackle http://www.tjstackle.com (under powder paint) has Pro-tec Glitter paint, which is pre-mixed, as well as just the MetalFlake Glitter that you can mix with the clear for your desired ratio. There are 10 or 12 different colors. I think the best way to do it is buy the clear powder paint and glitter separately and keep adding glitter until you get the desired look. Use this mixture as a top coat and make sure you shake it up really well. If you are using the candy colors I have had good luck with mixing the glitter directly with the paint, but if you use anything other than candy colors it doesn't mix well. The paint will absorb the glitter and you lose the affect. If you use it as a top coat it won't. The clear also gives a nice glossy finish. Quote Link to comment Share on other sites More sharing options...
jigfisherman Posted July 5, 2007 Report Share Posted July 5, 2007 Thanks for the site I am going to have to ride up there today I guess. Quote Link to comment Share on other sites More sharing options...
reeves Posted July 6, 2007 Report Share Posted July 6, 2007 I totally agree with Buckslayer says about mixing it yourself to achieve the effect you desire. I purchased a pound of the pre-mixed from CSI a while back and what a disappointment. They put so much glitter in the clear, it is so heavy that the stuff won't even fluidize in my fluid bed. Can barely raise an air bubble. I reduce it with clear powder to achieve the effect I want. Someone mentioned in an earlier post that CSI was bought out and had noticed that the quality was slipping. I would like to echo that. Whoever bought it fired the guy who was watching the store. Too bad, cause it is a great product. I am currently ready to purchase elsewhere. Quote Link to comment Share on other sites More sharing options...
Haulin'Bass Posted July 9, 2007 Author Report Share Posted July 9, 2007 Thanks guys. You been a big help. Got some clear coat and and going to put glitter in it and try it out. Jeff Quote Link to comment Share on other sites More sharing options...
